Parts by Type

print This page

End Yokes

Filters: BRAND = PTI, SERIES = 1310,
PART NUMBER SERIES SPLINE COUNT SPLINE DIA. HUB DIA. THRU HOLE C/L TO END STYLE DIFF MODEL NOTES VEHICLE CLASS BRAND
3104-10 1310 10 1.125 1.552 1.500 3.000 BS Dana 44 LD PTI
3104-1921 1310 10 1.178 1.438 2.469 SR No machined hub, but OD is 1.800" LD PTI
3104-17 1310 17 1.310 1.739 1.181 2.595 UB GM 8.2 LD PTI
3104-01 1310 23 1.031 1.552 1.500 3.000 BS Dana 28 Slinger 41498 LD PTI
3104-231 1310 23 1.260 1.562 1.625 3.062 BS Counterbore at hub end, Same as Dana 2-4-4441-1 LD PTI
3104-242 1310 24 1.250 1.876 1.500 3.000 UB Used at differential end on 07+ Jeep JK. LD PTI
3104-25 1310 25 1.085 1.521 1.500 2.875 UB GM 8.2 LD PTI
3104-02 1310 26 1.146 1.844 1.375 2.938 BS Dana 35 LD PTI
3104-03 1310 26 1.146 1.552 1.500 3.000 BS Dana 30, 44, 50 LD PTI
3104-26CV 1310 26 1.146 1.552 1.500 3.000 CV LD PTI
3104-262CV 1310 26 1.146 1.614 1.500 3.000 CV DODGE/JEEP FRONT TC CV Conversion Yoke, Splines counterbored on bottom, Includes hub sleeve LD PTI
3104-263 1310 26 1.146 1.500 1.469 3.000 BS Same as Dana 2-4-7021-1 LD PTI
3104-264 1310 26 1.146 1.453 1.469 3.000 BS 0 Midship end yoke used on multiple applications. LD PTI
3104-261CV 1310 26 1.146 1.453 1.500 3.000 CV 0 CV style midship end yoke used to bolt up a open socket style CV head to a center section. LD PTI
3104-266 1310 26 1.146 1.500 1.469 2.875 SR 0 Snap ring style midship end yoke used on Nissan, Ford, Toyota shafts & more. (3153-252, 3153-302) LD PTI
3104-266M 1310 26 1.146 1.450 1.469 2.875 SR 0 Same as 3104-266 but seal surface turned to 1.45" LD PTI
3104-268 1310 26 1.146 1.552 1.500 3.000 UB Dana 30, 44 takes 2-94-58X U-bolt kit, forged LD PTI
3104-267 1310 26 1.146 1.450 1.469 2.875 SR 0 Forged, PTI 26 spline midship stubs LD PTI
3104-05 1310 27 1.188 1.521 1.475 3.185 BS GM 7.25 LD PTI
3104-27 1310 27 1.172 1.688 1.062 2.750 BS Chrysler 7.25, 8.25 LD PTI
3104-07 1310 28 1.229 1.844 1.375 2.938 BS AMC 20 LD PTI
3104-08 1310 28 1.218 1.812 1.200 3.460 UB Ford 7.5 LD PTI
3104-28 1310 28 1.218 1.812 2.425 4.000 UB Ford 9 Forged / .500" Counterbore LD PTI
3104-28A 1310 28 1.218 1.812 2.155 3.850 UB Ford 9 Billet aluminum, includes u-bolts and spacer (if required) LD PTI
3104-281 1310 28 1.218 1.812 2.430 4.100 UB Ford 9 takes 2-94-28X u-bolt kit, forged LD PTI
3104-29 1310 29 1.276 1.875 1.500 2.938 BS Dana 60, 70 LD PTI
3104-291 1310 29 1.276 1.875 1.500 3.000 UB Dana 44, 60 takes 2-94-58X u-bolt kit, forged LD PTI
3104-09 1310 30 1.328 1.739 1.170 2.850 BS GM 8.875 Requires strap kit 2-70-28X LD PTI
3104-30 1310 30 1.312 1.940 1.150 3.160 UB GM 8.5 LD PTI
3104-301 1310 30 1.328 1.739 1.181 2.598 UB GM 8.5 Vette LD PTI
3104-302 1310 30 1.276 1.732 1.870 3.375 SR N/A infiniti center yoke LD PTI
3104-303 1310 30 1.312 1.940 1.375 2.850 UB GM 12 bolt takes 2-94-28X u-bolt kit, forged LD PTI
3104-321CV 1310 32 1.401 1.943 2.000 3.875 CV CV conversion yoke for 07 and up Jeep JK on front or rear output,
Splines counterbored top and bottom,
Includes hub sleeve		 LD PTI
3104-322CV 1310 32 1.401 1.943 2.000 3.875 CV 03-06 Jeep Rubicon with 241 transfer case LD PTI
3104-32CV 1310 32 1.401 1.875 2.000 3.875 CV TC NP 203/205 Same as 2-4-5341, Counterbored 0.30" LD PTI